Life Sciences Careers

How to Keep a Lab Notebook: Format, Rules and an Example Page

By Leela Ramaswamy · · 8 min read

How to Keep a Lab Notebook: Format, Rules and an Example Page

A lab notebook is the record that lets someone else, or you in eighteen months, repeat exactly what you did and see exactly what happened. In many workplaces it is also a formal document: evidence of who did the work and when, and the property of the institution rather than the person writing in it.

Most people learn the format by imitation and pick up bad habits along the way. The version below is what academic and industry labs generally expect from a bound paper notebook, with notes on chemistry course notebooks and on electronic notebooks at the end.

What you need

  • A bound notebook with numbered pages; grid pages make tables and sketches easier
  • A permanent pen with pigment ink, which resists water, solvents and fading
  • A scientific calculator, so calculations happen on the page and not in your head
  • Clear tape for printouts, gel images and instrument slips
  • Your lab's written notebook rules, if it has them

Set up the notebook once

  1. Write your name, the lab, your contact details and the start date inside the front cover.
  2. Reserve the first two to four pages as a table of contents with three columns: date, page numbers, entry title.
  3. Check that every page is numbered. If the notebook did not come numbered, number every page now, in ink.
  4. Add a page of abbreviations and standard recipes (your usual buffers, your plate layouts) so later entries can refer to them by name.
  5. Agree with your supervisor how data files are named and where they are stored, and write that down too.

Write each entry the same way

  1. Start each new experiment on a new page with the date in an unambiguous form, such as 2026-10-24. A date like 10/11/26 reads differently in different countries.
  2. Give the entry a title and a one or two sentence objective: the question this work answers.
  3. List materials with the details that change from bottle to bottle: reagent name, catalog number or recipe page, lot number, concentration and expiry. Cell lines get passage numbers. Instruments get their ID and the settings used.
  4. Write the procedure as you go, in the past tense. Refer to a written protocol by name and version, then record every departure from it: "incubated 45 min, not 30; timer missed."
  5. Show every calculation on the page with units. A number without its working cannot be checked.
  6. Record raw observations and results first (readings, counts, colors, images, plate maps), then any processed numbers.
  7. Finish with a short conclusion and the next step, then sign and date. If your lab uses witnesses, a colleague reads the entry and signs "read and understood" with the date.
  8. Update the table of contents before you close the book.

Lab notebook format at a glance

Section What goes in it Example
Header date, title, links to related pages 2026-10-24, "1x PBS for passaging, see p. 41"
Objective the question or goal make 500 mL of 1x PBS from 10x stock
Materials reagents with lot numbers, equipment IDs 10x PBS lot 22K118; pH meter PH-1
Procedure what you actually did, with changes mixed 2 min, filtered
Calculations formula, numbers, units C1V1 = C2V2
Results raw data, images, file names pH 7.41 at 22 °C
Conclusion what it means and what is next within range; store at 4 °C
Sign-off name, date, witness if used initials and date

A lab notebook example page

Here is a complete entry for a routine buffer preparation. The lot numbers and page numbers are made up for the example; the structure is the point.

2026-10-24                                              p. 42
Title: 1x PBS from 10x stock, 500 mL, for passaging (exp. CC-07)
Objective: prepare 500 mL 1x PBS, pH 7.4, filter-sterilized.

Materials
  10x PBS, no Ca/Mg, lot 22K118, exp. 2027-03
  Ultrapure water from lab system
  pH meter PH-1, calibrated today with pH 4, 7, 10 buffers (p. 40)
  0.2 um bottle-top filter, lot F5519

Calculation
  C1 x V1 = C2 x V2
  V1 = (1x x 500 mL) / 10x = 50 mL of 10x stock
  Water: 500 mL - 50 mL = 450 mL

Procedure
  10:12  Measured 50 mL 10x PBS in 100 mL cylinder.
  10:15  Added to 450 mL water in 500 mL bottle, mixed 2 min.
  10:20  pH 7.41 at 22 C. No adjustment.
  10:31  Filtered into sterile bottle.
         First filter clogged at about 300 mL; replaced with
         a second filter from the same lot. Cause unknown.

Result
  500 mL 1x PBS, pH 7.41. Labeled "1x PBS, LR, 2026-10-24".
  Stored 4 C, shelf B.

Next: use for passaging, p. 43.
Signed: LR 2026-10-24          Witness: ________

Notice what the entry does. Times sit next to each step. The clogged filter is recorded plainly instead of being tidied away, because if the batch causes trouble later, that line is the first clue. The pH meter calibration is cross-referenced to the page where it happened instead of being described again.

The arithmetic is the C1V1 dilution formula, the same one behind the dilution calculator. Using a calculator tool is fine, but write its inputs and result in the notebook, since a browser tab is not a record. If the recipe starts from powder, write the mass calculation as well; the molarity calculator is a quick way to check it.

For chemistry lab courses

Chemistry teaching labs often use notebooks with carbonless duplicate pages, so you hand in the copy and keep the original. Many instructors want a pre-lab written before you arrive: the purpose, the balanced equation, a table of reagents with molar masses, amounts and hazards taken from the safety data sheets, and an outline of the procedure. During the lab you add observations and data. Afterwards come calculations, percent yield and a discussion. The rules on ink, corrections and dates are the same as in research.

Corrections, gaps and printouts

  • Never erase, use correction fluid or tear out a page. Strike through a mistake with a single line so it stays readable, and add your initials, the date and a few words of reason if the reason is not obvious.
  • Do not leave blank space. Draw a line or a large cross through the unused part of a page so nothing can be added later.
  • Tape in printouts, gel images and instrument slips, then sign across the edge so your signature runs from the paper onto the page.
  • For data too large to paste in, write the file name, the folder path and the instrument that produced it.

Common mistakes

  • Writing it up later from memory. The details that seemed obvious, like which tube was which, are the first to go. Write in real time, even if it is messy.
  • Recording only what worked. Failed runs are data, and they save the next person a week of repeating them.
  • "Same as last time." Point to the page instead: "as p. 31, except 2 mM MgCl2."
  • Doing calculations on scrap paper and copying only the answer.
  • Pencil, or gel pens that run when wet.
  • No lot numbers, so a bad reagent cannot be traced across experiments.
  • Private abbreviations that nobody else can decode.

A quick check for any page

Before you close the book, hand the entry to a colleague, or imagine doing so, and ask two questions. Could they repeat the work using only this page and the protocol it names? Could they tell from the page alone whether it worked? If either answer is no, the missing piece is usually a lot number, a deviation you did not write down, or a result recorded only as "fine". Fix it while you still remember. Supervisors notice this habit quickly in new staff, and record keeping runs through most of the jobs in our map of careers in the life sciences, from research technician to QC analyst.

Paper or electronic?

Electronic lab notebooks (ELNs) are now common in industry and spreading in universities. They are searchable, they link straight to data files and protocols, and they are backed up with the rest of an institution's systems. In FDA-regulated work, electronic records and signatures fall under the rule known as 21 CFR Part 11, so regulated labs use validated systems rather than general note-taking apps. Paper still suits teaching labs, fieldwork, and benches where gloves and liquids make keyboards awkward. Many labs mix the two: paper at the bench, transferred to the ELN the same day.

Paper notebook Electronic notebook
Finding an entry table of contents full-text search
Data files referenced by name and path attached or linked
Audit trail ink, signatures, dates automatic time stamps and version history
Main risks loss, water, unreadable writing access rights, software changes, unvalidated tools

On the legal side, US patents have gone to the first inventor to file since the America Invents Act took effect in 2013, so dated notebooks decide far fewer priority disputes than they once did. They still serve as evidence of who conceived an idea and when, which is why companies and university technology transfer offices continue to ask for dated, signed pages.

FAQ

Who owns my lab notebook?

In most universities and companies, the institution does. You can usually keep a copy, but the original stays when you leave. Your institution's research records policy will say so.

Past tense or present tense?

Past tense for what you did ("added 50 mL"), present tense for what you conclude ("the buffer is within range").

How long should lab notebooks be kept?

Retention periods are set by institutions, funders and regulators and often run for years after a project ends. Your lab manager or research office will know which rule applies.

Is a spiral notebook acceptable?

For a class, often yes. For research, bound notebooks are preferred because pages cannot be removed or added without leaving a trace.

This explainer is general information, not medical advice. Decisions about treatment, donation or trials belong with a clinician who knows your history.

More on this topic